AudioControl BVR-10 Руководство по установке и эксплуатации - Страница 4

Просмотреть онлайн или скачать pdf Руководство по установке и эксплуатации для Приемник AudioControl BVR-10. AudioControl BVR-10 20 страниц. Cat-5 balanced video/audio driver cat-5 balanced video/audio receiver active-balanced series

Печатать страницу

CTIVE

tap the supply from another 24 VAC transformer if it's

handy.

Handy Tip: For remote applications the BVD-10 and

BVR-10 will work very well from a 12 volt battery

supply. There is a small decrease in the maximum audio

signal level headroom, but the video performance is

unaffected by the reduced supply voltage.

Cat-5 Wiring

The RJ-45 connection on the BVD-10 and BVR-10

conform to the EIA-568B standard. This is the same Cat-5

cable wiring standard that a typical

computer network utilizes. You can

use any existing 10/100Base-T

network cabling and patch bays in an

installation as long as it does not run

through a router or hub. The Cat-5

wiring must run directly from the

BVD-10 to the BVR-10.

While the Active-Balanced video

components are designed to operate

with full-quality video on up to 1000

feet of CAT-5 wiring, it is possible

to get a very usable image up to

2000 feet away. There will be a slight softening to the

picture, but many people would not even notice this. If you

require a high-quality image on an extended (over 1000

feet) run, then you should use a second pair of BVD-10/

BVR-10 as a repeater. This will provide the additional

signal gain and cable compensation for the extra CAT-5

wiring.

-B

ALANCED

RJ-45 connector

with wires