AudioControl HPX Руководство пользователя - Страница 10
Просмотреть онлайн или скачать pdf Руководство пользователя для Кроссовер AudioControl HPX. AudioControl HPX 20 страниц. In-dash processor and crossover
Печатать страницуINSTALLING YOUR HPX IN-DASH
PROCESSOR/CROSSOVER
Having absorbed everything in the manual up to this
point, then you probably know we endorse having an
authorized AudioControl dealer installer your HPX as it
would be in your best interest. Above and beyond having all
of the appropriate technical know-how and experience, they
have lots of cool tools.
If you are still with us and are feeling confident, than read on. . .
A. Placement and Mounting the HPX
Placement: By definition, the HPX in-dash proces-
sor/crossover was designed to be installed on or near the
dashboard of most cars. However, if you are a building a real
trick system, like with a separate audio system in the front
and a separate one in the rear of a vehicle, the HPX is an ideal
pre-amp control that can mounted in the front and/or the
rear of the vehicle.
Mounting: The HPX is flexible enough to mount
almost anywhere, although somewhere on the dash or in a
center console is the most logical. You will want to be able to
8
®
Owner's Enjoyment Manual
Figure 4: HPXwith mounting brackets
access it while you are sitting in the driver's seat of your
vehicle. The HPX is designed to be mounted almost anywhere
in a vehicle, although it is recommended to avoid hot spots
like the firewall, engine compartment, or tail pipe. The
mounting location must also be safe from water seepage or
areas with bad seals (rubber gaskets, not sleek furry mammals
who eat salmon). If there are old (or new) water stains, stay
away.
We have provided brackets to assist you in mounting the
HPX chassis under the dashboard or glovebox. The screw holes
on the HPX chassis also allow for easy installation underneath
a radio or with a dash kit. It is of utmost importance to mount
the HPX securely to avoid any undue stress or breakage from
over acceleration or braking.