Freedom Charge FDMC-1222 Инструкции по установке
Просмотреть онлайн или скачать pdf Инструкции по установке для Автомобильные аксессуары Freedom Charge FDMC-1222. Freedom Charge FDMC-1222 5 страниц. Qi wireless charging kit for ford mustang 2015
Печатать страницу2015 - Ford Mustang Qi Wireless Charging Kit
Please read thoroughly before starting installation and check that kit contents are complete.
Items Included in the Kit:
Qi Wireless Charging Module with
Mustang Specific Substrate
Power Harness with 3 amp Fuse
2015 Mustang Specific Non Slip Mat
These Instructions with Template
Removable Consumer Product Label
*Note this product is designed to work with Qi compatible devices. Please confirm that
your device is Qi compatible before installation. Visit
compatibility guide.
Safety Precautions:
• Work in well ventilated area that is clear of obstructions.
• Secure vehicle with tire chucks in both front and rear of tires.
• Turn vehicle accessories OFF and ensure ignition key is in OFF position.
• Wear safety goggles and snug fitting clothes.
• Use tools only for their intended purpose and which are in good repair.
• Only perform this task if confidence, skill, and physical ability permit.
NOTE: We strive to provide accurate and up-to-date installation instructions.
1222 Instructions 3-9-15.doc
(Kit # FDMC-1222)
Tools & Supplies Needed:
IMPORTANT: Do not place smart keys
within 15cm of charging mat. Vehicle
may not detect key to start vehicle. Do
not place metal objects in tray while
charging.
Page 1 of 5
INSTALLATION
I NSTRUCTIONS
Plastic Trim Removal Tool
10mm socket driver
7mm Socket Drive
Center Punch/Scribe Tool
Power Drill
1/2" Drill Bit
Wire Ties
Soldering Iron & Solder
Tape or Heat Shrink Electrical Tubing
www.brandmotion.com
(Recommended)
for phone