Casio CT-X3000 Руководство по обновлению прошивки - Страница 2

Просмотреть онлайн или скачать pdf Руководство по обновлению прошивки для Электронная клавиатура Casio CT-X3000. Casio CT-X3000 3 страницы.

Fixed Problem with This Firmware

This firmware fixes the minor problem related the Registration function.

Updating Firmware

IMPORTANT!

All the user data will be deleted after the update. So back up necessary user data in Digital Keyboard memory to a USB flash drive before

updating the Digital Keyboard firmware.

Performing the firmware update procedure incorrectly can result in you are not being able to start up your Digital Keyboard. Be sure to

observe the point below.

Do not disconnect the AC adaptor or remove the USB flash drive from the Digital Keyboard while firmware updating is in progress.

Do not touch any buttons or keyboard keys, except as required for updating, while firmware updating is in progress.

Perform the steps below to update.

Copy the "CTX3000R.upd" firmware file to a USB flash drive.

Use a USB flash drive that has been formatted to FAT32.

Place the "CTX3000R.upd" firmware file into the root (not a folder) of the USB flash drive.

Make sure the Digital Keyboard's power is off. Then insert the USB flash drive from the step 1 into the Digital Keyboard's USB flash

drive port.

While pushing the buttons below simultaneously, turn on the Digital Keyboard.

[7] (WRITE)

[8] (INSERT)

[9] (DELETE)

Make sure "UPD MODE" is on the display.

UPD MODE

Pushing one of any buttons starts preparing for updating, then the display will be changed as below.

SETUP

When the Digital Keyboard is ready, the display will be changed as below.

SEL FILE

Make sure "CTX3000R" is on the display when you push any of the buttons.

CTX3000R

"OK?" will be displayed when you push the [6] (ENTER) button.

Pushing the [+] (YES) button starts updating.

Firmware updating takes about 30 minutes. Do not touch the Digital Keyboard during that period.

The display will be changed as "CHK nn%"

10.

When update is finished, "COMPLETE" will be displayed.

COMPLETE

11.

Pushing any button turns the Digital Keyboard off. This completes the firmware update operation.

"WRT nn%"

"FIN nn%" as the update progresses.