AEV FUEL CADDY Руководство по установке - Страница 5

Просмотреть онлайн или скачать pdf Руководство по установке для Автомобильные аксессуары AEV FUEL CADDY. AEV FUEL CADDY 5 страниц.

Mount tire to Tire Carrier securing lug nuts. Tighten the tire mount bolt on the back of the Tire Carrier

until the tire is pulled tight to the Fuel Caddy. Use a hammer and a flat head screwdriver to bend the

tongues of the safety washer against the head of the bolt.

Remove tire and tighten the anti-vibration bolt (now accessible through top of Fuel Caddy.) Once it is

determined that the tire carrier has been installed correctly, use a hammer and a flat head screwdriver to

bend the tongues of the safety washer against the head of the bolt.

NOTE: If installing an AEV CHMSL, a FIR TREE cable connector is supplied to secure wiring to the Fuel

Caddy back plate bracket. Follow the instructions for installing your CHMSL for connecting wiring

through tailgate.

Re-attach Turnbuckle Linkage to Tailgate bracket, mount tire to Tire Carrier, and screw on the Fuel

Caddy ratchet cap.

Assembling the siphon. Slide siphon hose through the supplied 7/8" hex nut. This will add weight and

prevent the hose from curling inside Fuel Caddy. Next insert shaker siphon pump into siphon hose. Push

the hex nut down over the siphon pump.

A M E R I C A N

E X P E D I T I O N

V E H I C L E S