Conrad-johnson design CAV45 Руководство пользователя - Страница 6

Просмотреть онлайн или скачать pdf Руководство пользователя для Усилитель Conrad-johnson design CAV45. Conrad-johnson design CAV45 11 страниц.

onnection

SOURCES (INPUT1, INPUT2, INPUT3): These high level inputs

are electronically equivalent. Connect any high-level source such

as CD player, Tuner, DAC, etc. to these inputs.

RIGHT OUTPUT, LEFT OUTPUT: Five-way binding posts are

provided for connection of your loudspeakers, with correct spacing

to accept a standard "double banana" plug. They will also accept

spade lugs, bare wire, or pin connectors.

The two channels should be connected in correct "relative phase".

This means that when the same signal is applied to both channels,

the right and left channels speaker diaphragms will move

synchronously - in and out together. Terminals on speakers are

usually coded - one designated "C", "ground", "-" or black, the

other designated "+" or red. "In phase" connection of the speakers

can normally be achieved by taking care to connect the wire from

the "+" amplifier terminal to the red or "+" coded terminal on each

speaker, and connecting the "-" terminal to the black or "-" coded

terminal on each speaker. In phase connection of the speakers can

be readily ascertained by ear. Listen to a recording of a solo

vocalist (use a mono recording if available). With the speakers in

phase the voice should be clearly focused between the two

speakers. With the speakers connected out of phase, the voice will

be diffused, with no identifiable source. Relative phase may be

reversed by switching the "+" and "-" leads at one speaker only.

ontrols

<power>: Rocker switch to power the CAV45 on.

<selector>: Use this rotary switch to select between the three

available high-level inputs.

<level>: Level setting is accomplished by the rotary level control.

CAV45

Owner's Manual