audiophony NOVA-15A Руководство пользователя - Страница 6
Просмотреть онлайн или скачать pdf Руководство пользователя для Динамики audiophony NOVA-15A. audiophony NOVA-15A 8 страниц. 10/12/15 inches 2-way amplified speakers with bass reflex
Печатать страницу
English
9
PAIR button
This key is used to pair a Bluetooth source to the
speaker.
To pair your Bluetooth device, press and hold the PAIR
button for more than 3 seconds, the LED flashes.
On your device search for a device named Bluetooth
and then connect it. The LED stays on continuously, the
speaker is now connected.
10
BT/AUX fader
Allows you to configure the BT or AUX input level.
Please make sure the SIG/CLIP LED is not lit for long
periods to ensure an optimal sound quality.
11
TWS button
The TWS function allows you to pair 2 speakers together
to broadcast the Bluetooth signal in stereo.
To pair two speakers with each other, press the TWS key
for more than 3 seconds, the LED flashes. Do the same
on the other speaker until the LEDs stay on.
12
Equalization zone
These two faders allow you to adjust the bass and treble
settings from -15dB to +15dB.
These adjustments affect the MASTER part of the signal.
5 - Connectors
5.1 - Balanced
The
COMBO
sockets
symetrical.
This
type
connectors allows you to transmit
a signal over long runs of cables
without altering its quality, that
is why we recommend to use
symetrical signals.
The figures opposite describe
the balanced wiring of the XLR or
Jack 6.35 plugs.
5.2 - Unbalanced
If you do not have any source
with symetrical signal, please do
not use cables longer than 1.5 m.
The figures opposite describe the
unbalanced wiring of the XLR or
Jack 6.35 plugs.
Page 6
NOVA-10A/12A/15A - 10/12/15 inches 2-way amplified speakers with bass reflex
are
2
1
of
3
3 = Coldspot (-)
2
1
1 = Ground
3
Shunt between
1 and 3 pins
13
LED SIG/CLIP
This LED has two functions:
- It lits in yellow when a signal is detected on one of the
two inputs.
- It lits in red when the sum of each signal levels exceeds
0dB.
Please make sure the SIG/CLIP LED is not lit for long
periods to ensure an optimal sound quality.
14
DSP button
This key is used to toggle between preset audio modes.
15
XLR LINE OUT socket
Allows you to retrieve the sum of each incoming signal
and transmit it to another amplified speaker, mixing
desk, or speaker/amplifier system.
16
AUX input
Line level input via Jack 3.5;
Allows you to retrieve the signal of, for instance, an MP3
player.
1 = Ground
2 = Hotspot (+)
2 = Hotspot (+)
Coldspot (-)
Sleeve
Sleeve
Ring
Ground / Shield
Tip
Sleeve
Sleeve
Tip
Ground / Shield
Ring
Tip
Hotspot (+)
Tip
Signal