Addonics Technologies Pocket ExDrive Руководство пользователя - Страница 6

Просмотреть онлайн или скачать pdf Руководство пользователя для Хранение Addonics Technologies Pocket ExDrive. Addonics Technologies Pocket ExDrive 15 страниц.

Печатать страницу

Jumper settings inside the Pocket Exdrive Drive Case

Factory Default jumper setting

(this setting works with all interface

cables and desktop drive cradle)

JP4 has one jumper to the right

No jumpers on JP2 or JP3

Note: there may be spare jumpers in

JP2 and JP3. These spare jumpers

should be sitting on the outer pin only

A. If the Pocket Exdrive will be use Externally without the use of

external ac adapter, the Switch from the case must be switch to the

left to grab power from system.

B. If the Pocket Exdrive will be use Externally with the use of

External ac adapter, the Switch from the case must be switch to

the right to grab power from external power supply.

Note:

! We recommend setting the hard drive to MASTER

mode/setting at all times. (Default setting)

! We recommend setting the hard drive to DMA mode at

all times when connecting it internally.

Addonics Technologies – Pocket Exdrive Kit Users Guide v6.0

Jumper setting to enable DMA in drive

cradle

(this setting does not work with

any interface cable in external drive

application)

Both JP3 and JP4 have one jumper to the

left.

No jumper on JP2