Consolar EURO L20 Руководство по установке - Страница 9

Просмотреть онлайн или скачать pdf Руководство по установке для Солнечная панель Consolar EURO L20. Consolar EURO L20 12 страниц. In-roof mounting system for plain tile roofing

Печатать страницу

Fig. 16 Connect collectors to solar circuit. Later check for leak tight-

ness! ATTENTION: Danger of burns at connections during solar irra-

diation!

Fig. 18 Slip rubber seal over cable, insert solar sensor into sensor

sleeve; close opening with rubber seal and lead cable through roof.

Fig. 20 Adjust roof tiles/slates below collectors; fix with self tapping

screws.

Fig. 17 Pipe lead with sarking membrane: make a T-shape cut into

the sarking, lead through the connection hose and close cuts with ap-

propriate tape. Inside the roof connect the collector connection hose

(stainless steel, 18 mm) to the solar circuit, for example via double

socket or compression ring coupling.

Fig. 19 Position wooden support along collector and fasten with

4 x 35 and 5 x 120 self tapping screws.

Fig. 21 Fix metal clips for lower flashing sheet (1) and fold onto tile

or slate (2).