Belden FX FUSION SC CONNECTOR Руководство по установке - Страница 5
Просмотреть онлайн или скачать pdf Руководство по установке для Кабели и разъемы Belden FX FUSION SC CONNECTOR. Belden FX FUSION SC CONNECTOR 8 страниц. 900μm tight buffer/250μm
Также для Belden FX FUSION SC CONNECTOR: Руководство по установке (8 страниц)
Печатать страницу
9.
Strip the cable from that mark.
To avoid breaking the fiber,
the buffer should be stripped
about 5mm at a time.
IMPORTANT:
When stripping, the
buffer and the 250µm coating
must be completely removed to
allow to cleave the fiber.
10.
Clean the fiber.
FX FUSION SC CONNECTOR
900µm TIGHT BUFFER/250µm - INSTALLATION GUIDE
11.
Cleave the fiber at 10mm.
For both Belden cleavers, the
10mm mark is where the fiber
holder ends as shown on red
arrows.
DON'T TOUCH OR
CLEAN
PX106500-EN REV E
attempt to
the cleaved fiber.
Groove for
250µm
Groove for
900µm
Page 5 of 8