Addonics Technologies RT54S2HMEU Руководство - Страница 2

Просмотреть онлайн или скачать pdf Руководство для Хранение Addonics Technologies RT54S2HMEU. Addonics Technologies RT54S2HMEU 2 страницы.

Печатать страницу

While holding the RAID setting button, turn on the HPM and SATA

hard drives and continue to hold button for at least 5 seconds.

Note:

The onboard LED's for the eSATA and USB will start blinking

while holding down the raid setting button. Once the raid

setting button is released, the PM Health LED will blink 4-6

times.

If the PM Health LED stops blinking, the raid set is set

correctly. If the PM Health LED lights up as solid green, it is a

bad setup. You need to repeat setting up the raid again.

Instruction for Special RAID Modes:

BIG 2 - 2 Drives Spanned

Note: Do not connect more than 2 SATA drives to the hardware port

multiplier. Doing so will hang the system when you configure the

raid.

For SATA drives with different capacities, the hardware port

multiplier will use the smallest drive capacity of the 2 drives

connected to create the total partition size.

FAST 2 - 2 Drives Striped

Note: Do not connect more than 2 SATA drives to the hardware port

multiplier. Doing so will hang the system when you configure the

raid.

Verify RAID Setting on the HPM

Note: Disconnect the HPM from host when verifying the RAID setting.

It is assumed that you have already connected the SATA drives and set

up the raid mode when verifying the raid setting.

Turn on the power for RAID V.

Push the RAID setting button with the tool provided. Using the

table below, verify if the LEDs are lighting up. The selected

LEDs will light up for 2 seconds followed by a blink and cycles

back.

RAID Mode

BIG 2

BIG 4

FAST 2

FAST 4

SAFE FAST

SAFE 2

RAID 5

RAID 5 + S

LED number is per HPM mounted

ADDONICS TECHNOLOGIES

LEDs

LEDs 1, 2 & 3 all OFF

1 ON, 2 & 3 OFF

3 ON, 1 & 2 OFF

2 ON, 1 & 3 OFF

1 & 3 ON, 2 OFF

1 & 2 ON, 3 OFF

2 & 3 ON, 1 OFF

1, 2 & 3 all ON

Model: RT54S2HMEU

TECHNICAL SUPPORT

Phone:

Hours:

Email:

408-453-6212

8:30 am - 6:00 pm PST

http://www.addonics.com/support/query/