Abus SHSG10000 Руководство по установке и обслуживанию - Страница 9
Просмотреть онлайн или скачать pdf Руководство по установке и обслуживанию для Система безопасности Abus SHSG10000. Abus SHSG10000 11 страниц. Z-wave siren
Также для Abus SHSG10000: Краткое руководство (2 страниц)
Печатать страницу
B
4.3. Reset (Factory-Reset)
4.4
Important Note
Once the device is added to a Z-Wave gateway, the alarm can be released and
terminated In Event of an Alarm the high-volume siren (95dB) will sound and LED
strobe lights up.
In Event of main power loss, the Siren can even operate up to 5 minutes in Alarm-
case by the integrated backup-battery. (or 4 hours standby operation)
Press the Network-button 3 times within 1.5
seconds and the Status-LED will flash 3 times
If the Remove device process is successful,
the Status-LED flash 6 times.
Repeat the inclusion process from step B if it
was not successful.
Press the Network-button for 10 seconds to
factory reset the device
Note:
1, This procedure should only be used if the
primary gateway is not capable of acting.
2, If the multi-sensor is set to the factory
setting, the status is set to "not included", the
association
settings
configurations are reset to default.
9
English
and
possible