Consort SLPBWIFI Руководство по установке и управлению - Страница 6

Просмотреть онлайн или скачать pdf Руководство по установке и управлению для Контроллер Consort SLPBWIFI. Consort SLPBWIFI 8 страниц. Wireless controller

Печатать страницу

18. Built-in Occupancy Sensor

In order to detect presence in the room, SLPBWIFI

has a built in microwave sensor. For the occupancy

detection to work correctly it is necessary to find the

right settings for the sensor. This will minimise errone-

ous triggering.

All settings can be changed using the Consort Con-

nect app. This can be done under the title

'Occupancy Sensor' in the settings menu.

There are 3 values which can be changed. These

are the sensitivity, responsiveness and the occupan-

cy timeout.

The value for sensitivity adjusts the point at which a

disturbance counts toward the decision to trigger

the heater. It is adjustable from 0 to 9 which adjusts

the sensitivity. 0 is minimum sensitivity, 9 is maximum

sensitivity. Setting sensitivity to the minimum setting

(zero) disables the sensor.

The value for responsiveness is used to consider sev-

eral readings before triggering occupancy. This val-

ue is also adjustable from 0 to 9, the higher it is set

the less sensor readings are required to trigger occu-

pancy. 0 is minimum responsiveness, 9 is maximum

responsiveness.

The occupancy timeout is the length of time the

heater stays on for without movement being trig-

gered.

How does the microwave sensor work?

The occupancy sensor works differently depending

on what operating mode is manually selected.

When in MANUAL mode, the microwave sensor will

switch the heater into FROST mode automatically

when the occupancy timeout is reached. The app

display will then show 'Auto off'. When this is shown,

the heater will switch back to manual mode auto-

matically once movement is detected.

When in automatic mode, the heating will automati-

cally switch off when the occupancy timeout is

reached. It will then switch back on when move-

ment is detected. The preheat function is unaffect-

ed by this and operates as normal.

19. Pin Lock feature

The lock feature allows locking 2 different aspects

of the controller using a pin number. It is possible

either lock the controller completely so that it

cannot be tampered with, or only lock the WIFI

pairing. Locking the WIFI pairing prevents people

from pairing the heater to their smartphones unless

they have the pin.

These settings can be implemented under the title

'Lock' in the settings menu.

To disable lock from the controller, hold down the

button until it begins flashing green. The controller

will begin a sequence of flashes. It will flash green,

then flash red, then flash green and then flash red

again. Each of these flashing sequences represent

a different digit in the pin number. The number of

times you press the button during each flashing

sequence is entered as the number for that digit.

For example, if your pin number was set as 1234,

the following sequence would unlock the

controller.

Hold down the controller button

Controller will flash green, press the button

once during this sequence

Controller will flash red. Press the button twice

during this sequence.

Controller will flash green. Press the button

three times during this sequence.

Controller will flash red. Press the button four

times during this sequence.

This will result in the pin '1234' being entered,

unlocking the controller. The controller will not lock

again until manually done via the Consort Connect

app.

NOTE: Once this pin has been confirmed, the lock

cannot be removed without knowing the correct

pin number.

he pin is NOT recoverable.