AudioQuest Niagara 5000AP Руководство пользователя - Страница 5
Просмотреть онлайн или скачать pdf Руководство пользователя для Распределение питания переменного тока AudioQuest Niagara 5000AP. AudioQuest Niagara 5000AP 18 страниц. Low-z power / noise-dissipation system
Печатать страницуInstallation | Unpacking
Before unpacking your Niagara 5000AP, inspect the carton for any obvious damage to the boxes and internal
protective materials. If internal damage is likely, contact the carrier who delivered the unit. If shipping damage is
evident on the product, then please contact your shipping carrier. Please save all shipping and packing materials.
Should you move or otherwise need to transport your Niagara 5000AP, these packing materials will ensure the
safest transportation.
The double box set should contain the Niagara 5000AP (220-240V Edison-NEMA Duplex AC Outlets), two foam
inserts, owner's manual, Quick-Start Guide, front-panel polishing cloth, rack-mount kit, and warranty registration
card. Registration is recommended. In the event that your original ownership documents are lost, your registration
can be used to establish whether the unit is within the warranty period.
Safety Information | Warnings
Before operating the Niagara 5000AP, please read and observe all safety and operating instructions (or, at the
very least, the quick-start sheet). Retain these instructions for future reference.
¡ Do not disassemble or in any way modify the Niagara 5000AP. There are no user-serviceable parts
inside.
¡ Keep away from moisture and avoid excessive humidity.
¡ Do not allow liquids or foreign objects to enter the unit.
Servicing | Return to AudioQuest
Servicing of the Niagara 5000AP must be performed by AudioQuest, and is only required when:
¡ The Niagara 5000AP has been exposed to rain, flooding, or extreme moisture.
¡ The Niagara 5000AP does not appear to operate normally. (See "Trouble-Shooting Guide. " )
¡ The Niagara 5000AP has been dropped and sustained considerable physical damage.
If sending the Niagara 5000AP to AudioQuest for servicing (or shipping it for any reason), please use the factory
approved packaging materials. If you have lost any of these (double carton, two foam inserts, one poly bag),
please contact AudioQuest for replacements. We will provide replacement packaging materials for a nominal
charge; shipping costs will be paid by the individual or company requesting the packaging material. Please do
not rely on other methods of packaging, including those provided or suggested by packaging/mailing stores.
These methods and materials could seriously damage the product, as well as its finish. Even the loss of the thick
polybag is enough to permanently damage the finish during transport. If you have lost the original packaging
material, please request replacement materials from AudioQuest.
Power Source
Ideally, the power source to which the Niagara 5000AP is connected should be adequate for use at 220-240V
single phase nominal voltage, 16 amps (current capacity RMS). However, the Niagara 5000AP will operate very
well with a 10-amp service outlet. If the maximum current capacity available is 10 amps, and the system exceeds
10 amps RMS current capacity, it is possible that there may be nuisance tripping at your electrical service panel.
This is not a safety issue; the electrical panel's circuit breaker will trip if the maximum current capacity is exceeded.
For proper operation, the Niagara 5000AP requires a safety ground (supplied via the power utility AC wall outlet).
5