AudioQuest Niagara 5000EU Руководство пользователя - Страница 6
Просмотреть онлайн или скачать pdf Руководство пользователя для Машина для снижения шума AudioQuest Niagara 5000EU. AudioQuest Niagara 5000EU 20 страниц. Low-z power, noise-dissipation system
Также для AudioQuest Niagara 5000EU: Краткое руководство по эксплуатации (2 страниц)
Installation | Unpacking
Before unpacking your Niagara 5000EU, inspect the carton for any obvious damage to the boxes and internal
protective materials. If internal damage is likely, contact the carrier who delivered the unit. If shipping damage is
evident on the product, then please contact your shipping carrier. Please save all shipping and packing materials.
Should you move or otherwise need to transport your Niagara 5000EU, these packing materials will ensure the
safest transportation.
The double box set should contain the Niagara 5000EU (220-240V Schuko AC Outlets), two foam inserts,
owner's manual, quick-start sheets, front-panel polishing cloth, and warranty registration card. Registration is
recommended. In the event that your original ownership documents are lost, your registration can be used to
establish whether the unit is within the warranty period.
Safety Information/Warnings
Before operating the Niagara 5000EU, please read and observe all safety and operating instructions (or, at the very
least, the quick-start sheet). Retain these instructions for future reference.
¡ ¡ Do not disassemble or in any way modify the Niagara 5000EU. There are no user-serviceable parts inside.
¡ ¡ Keep away from moisture and avoid excessive humidity.
¡ ¡ Do not allow liquids or foreign objects to enter the unit.
Servicing/Return to AudioQuest
Servicing of the Niagara 5000EU must be performed by AudioQuest, and is only required when:
¡ ¡ The Niagara 5000EU has been exposed to rain, flooding, or extreme moisture.
¡ ¡ The Niagara 5000EU does not appear to operate normally. (See "Trouble-Shooting Guide. " )
¡ ¡ The Niagara 5000EU has been dropped and sustained considerable physical damage.
If sending the Niagara 5000EU to AudioQuest for servicing (or shipping it for any reason), please use the factory
approved packaging materials. If you have lost any of these (double carton, two foam inserts, one poly bag),
please contact AudioQuest for replacements. We will provide replacement packaging materials for a nominal
charge; shipping costs will be paid by the individual or company requesting the packaging material. Please do not
rely on other methods of packaging, including those provided or suggested by packaging/mailing stores. These
methods and materials could seriously damage the product, as well as its finish. Even the loss of the thick polybag
is enough to permanently damage the finish during transport. If you have lost the original packaging material,
please request replacement materials from AudioQuest.
Power Source
Ideally, the power source to which the Niagara 5000EU is connected should be adequate for use at 220-240V 50Hz
single phase nominal voltage, 16 amps (current capacity RMS). However, the Niagara 5000EU will operate very
well with a 10-amp service outlet. If the maximum current capacity available is 10 amps, and the system exceeds
10 amps RMS current capacity, it is possible that there may be nuisance tripping at your electrical service panel.
This is not a safety issue; the electrical panel's circuit breaker will trip if the maximum current capacity is exceeded.
For proper operation, the Niagara 5000EU requires a safety ground (supplied via the power utility AC wall outlet).
Placement
The Niagara 5000EU is manufactured with four rubber textured polymer feet for safe, secure placement on any
6