Constellation Pictor Руководство пользователя - Страница 9
Просмотреть онлайн или скачать pdf Руководство пользователя для Усилитель Constellation Pictor. Constellation Pictor 17 страниц. Line stage preamplifier
Печатать страницуControls / displays / indicators
10 - 16. Front panel controls
The front panel includes an LCD touchscreen and two knobs plus five buttons positioned underneath the dis-
play. These buttons allow you to control the Pictor without its remote. The functions of the buttons are shown
using icons on the touchscreen. Here are the functions of the buttons and knobs:
10. Balance
This knob adjusts left-to-right balance when an input screen is displayed—i.e., when an input is selected. Turn
the knob counterclockwise to shift the balance to the left, clockwise to shift the balance to the right. An onscreen
indicator will indicate if the balance is centered or how far it is shifted to one side or the other.
11. Volume
The volume control is always active when the Pictor is powered up and the mute is deactivated. Note that the
control is calibrated in negative decibels (-dB), reaching maximum volume at 0.0 dB and minimum at -99.0 dB.
Thus, when you turn the volume up (clockwise), the number on the front display will decrease. When you turn
the volume down (counterclockwise), the number will increase. The adjustments steps are in 1 dB increments
between -99.0 dB and -50.0 dB, and 0.5 dB increments from -49.5 dB to 0.0 dB.
12. Home
This button brings you to the input select screen no matter which control screen you are currently viewing.
13. Return/back
This button brings you back to the previous control screen. For example, from any input's screen, such as XLR 1,
it will take you back to the input selector screen.
14. Standby/power
Push this button to turn the Pictor on and off. When you turn the unit on, it will take a few seconds for the unit
to warm up. When it is ready for use, its LCD screen will show the most recently selected input. To put the unit
in Standby mode, press this button again after turning on the power.
Hold this button down for 5 seconds to turn the Pictor off. The unit will enter cool-down mode for 10 seconds.
During cool-down, no buttons on the unit or remote will operate.
9