AudioQuest FLX 16-2 Руководство - Страница 2

Просмотреть онлайн или скачать pdf Руководство для Кабели и разъемы AudioQuest FLX 16-2. AudioQuest FLX 16-2 2 страницы. Bulk (unterminated) speaker cable

Печатать страницу

FLX 16-2 & FLX 14-2

Step 1

Measure about 5.5" of cable. Using a sharp

blade or a jacket cutter, carefully strip back the

outer jacket and remove. This will expose the

two conductor wires and two fillers inside.

Step 2

Using a wire cutter, remove the two thin black

fillers. Be careful not to cut the conductor wires.

Step 3

Using a wire stripper, remove ½" of insulation

from each wire.

If you have any questions or concerns – please call AudioQuest at (949) 585-0111

or email: [email protected]

Step 4

Insert the Red wire into a red-stripe speaker

connector and tighten the connector's screws

using a hex allen wrench. Insert the Black

wire into a black-stripe speaker connector and

tighten the connector's screws using a hex allen

wrench.

Step 5

Ensure all connections are secure.