Constellation audio Inspiration PREAMP 1.0 Руководство пользователя - Страница 6
Просмотреть онлайн или скачать pdf Руководство пользователя для Усилитель Constellation audio Inspiration PREAMP 1.0. Constellation audio Inspiration PREAMP 1.0 16 страниц.
Также для Constellation audio Inspiration PREAMP 1.0: Руководство пользователя (16 страниц)
Печатать страницуThe input numbers from left to right, looking at the back of the PREAMP 1.0 are:
1
, 2
, 3
right
right
right
2. RCA inputs
These unbalanced inputs are provided as a convenience for use with unbalanced signal sources.
Whenever possible, we recommend using XLR connections instead. Connecting to an unbalanced source
is handled in the same way an XLR balanced source.
The input numbers from left to right, looking at the back of the PREAMP 1.0 are:
4
, 5
, 6
right
right
right
IMPORTANT NOTE: To preserve true dual-mono operation, the PREAMP 1.0 uses a symmetrical circuit
layout. This configuration requires that the PREAMP 1.0's back panel connections be laid out a little
differently from those on most preamps. For example, the left-channel connection for Input 5 is at the
far right side of the back panel, and the right-channel connection is at the far left side. Connecting the
cables in the usual side-by-side fashion will result in an incorrect installation and the mixing of sounds
from different source devices.
3. XLR outputs
The inner four XLR connections on the rear of the PREAMP 1.0 are outputs. The signal at these outputs
is the same—it does not matter if you use output 1 or output 2. To remove an XLR plug, push on the tab
on the connector body and pull the plug out.
From left to right, looking at the back of the PREAMP 1.0, the outputs are: 1
Be sure to match the output to the correct channel on your amp. As you are looking at the back of the
PREAMP 1.0, the outputs on the left side are for the right channel, the outputs on the right are for the
left channel.
6
——3
, 2
, 1
.
left
left
left
——6
, 5
, 4
.
left
left
left
, 2
——2
, 1
.
right
right
left
left