Beliani WEBER Инструкция по применению - Страница 2
Просмотреть онлайн или скачать pdf Инструкция по применению для Вентилятор Beliani WEBER. Beliani WEBER 4 страницы.
Печатать страницу1.SAFTY PRECAUTIONS
1. To ensure the success of the installation, be sure to read the instructions and review the diagrams
thoroughly before beginning
2. All electrical connections must be in accordance with local codes, ordinances or National Electrical
Code. If you are unfamiliar with methods of installing electrical wiring secure the services of a qualified
electrician
3. Make sure that your installation will not allow rotating fan blades to come in contact with any object.
4. If you are installing more than one ceiling fan, make sure that you do not mix fan blade sets
5. If the fan will be mounted on a ceiling outlet box, a 4 "x1/4" metal box is require The box must be
directly supported by building structure. The box and its support must be able to support the moving
weight of the fan. The box must not twist or work loose. Do not use plastic boxes
6. Installation to a concrete ceiling should be performed by a qualified electrician
7. Before beginning, disconnect power by removing fuse or turning off circuit breaker
8. After fan is completely installed. Make sure that all connections are secured to prevent fan from falling.
9. Do not insert anything into the fan blades while coming ran is operating
10. Fan must be turned off and stopped before reversing fan direction
11. The fan must be mounted with the blades at least 2.3m from the floor to minimum the possibility of
accidental contact with the fan blades
12. The supply wires Live& Neutral must be connected to wall switch( double poles)having a contact
separation at least 3mm in all poles.
13. The appliance is not to be used by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction.
14. Children being supervised not to play with the appliance.
15. WARNING: If unusual oscillating movement is observed, immediately stop using the
ceiling fan and contact the manufacturer, its service agent or suitably qualified persons.
16. The instructions for ceiling fans shall include the substance of the following:
– the fixing means for attachment to the ceiling such as hooks or other devices shall be fixed with a
sufficient strength to withstand 4 times the weight of the ceiling fan;
– that the mounting of the suspension system shall be performed by the manufacturer, its
service agent or suitably qualified persons;
17. The weight of the appliance in 4.54 kilograms.
18. Once yearly Clean your fan periodically to its new appearance. Use only lukewarm water, Do not use
detergent, corrosive or acidic solution.
Damp the cloth lightly. Use only soft or lint-free cloth to clean the fan. Rough fan will scratch the surface.
There is no need to oil the fan. use a soft cloth moisten with mild soap to clean the blade, and then use a
dry cloth to wipe it again.
NOTE: The import safeguards and instructions appearing in the manual are not meant cover all possible
conditions and situations that may occur. It must be understood that common sense. Caution and
carefulness are factors which cannot be built into any product. These factors must be supplied by the
person(s) caring for and operating the unit.
CAUTION:
To reduce the risk of personal
injury, do not bend the blades when installing the
blades, balancing the blades or cleaning the fan, Do
not insert foreign objects between rotating fan blades
-1-
CAUTION:
The box must be supported
directly by the building structure. The box and its
support must be able support the fan weight-must
not twist or work loose. Do mot use plastic boxes.
2.TOOLS AND MATERIALS REQUIRED
• Philips screw driver
• Blade screw driver
• 11 mm wrench
3. PACKAGE CONTENTS / THE CEILING FAN ELEMENT
1. Safe steel wire
2. J hook (For temporary hang up the fan
when wiring connection)
3. Mounting bracket
4. Nuts
5. Receiver
6. Remote
7. Hanger ball
8. Down rod
9. Upper canopy
10. Screws
11. Yoke cover
12. Cross pin
13. Cotter pin
14. Screws
15. Motor Housing
16. Blade holder decoration part
17. Light kit plate fixing bracket
18. Motor
19. Blade holder
20. Blades
21. Light kit plate
22. LED light kit
23. Shade
• Step ladder
• Pliers
• Insulating tape
-2-