DanVex DEH-5K Руководство - Страница 13
Просмотреть онлайн или скачать pdf Руководство для Осушитель DanVex DEH-5K. DanVex DEH-5K 19 страниц. Industrial condensing dehumidifiers
Печатать страницу
6.1.4
Parameters Setting
A.General parameters
ON/OFF:
Short pressto
turn on/off the controller :the small OFF appear in the top when the unit is powered off
and disappear after 3 minut; e s
Short pressto
to exit during parameters setting.
Fan Speed:
Press
to adjust the fan speed.
Air Damper:
Press
to open or close the air damper.
Mode Change:
Short press
&
simultaneously to change the available system working mode.
Humidity Set:
Press
to reduce humidity, press
to raise humidity (1% changed each press).
Only for the available system working mode.
Short press
&
simultaneously to change the available system working mode.The temperature in the
top will flash,press
to reduce temperature, press
5 seconds without setting,the value will be saved and exit
Filter:
Long press Short press
&
simultaneously for 5 seconds to display the run time,wait for 5 seconds to
exit;
Long press
for 10 seconds to clear the alarm and reset the time.
B.Factor y Parameters
Factor y parameters setting:
Long press
for 5 seconds to enter the factor y parameters setting mode:the parameters code
R,P,O,H,C,A,D,F will appear ;Press
to select the parameters code R,P,O,H,C,A,D,F;
or
Short press
to set the available code;
Factor y parameters setting:
Long press
for 5 seconds to enter the factor y parameters setting mode:the parameters code
R,P,O,H,C,A,D,F will appear ;
Press
or
to select the parameters code R,P,O,H,C,A,D,F;
Short press
to set the available code;
Press
or
to adjust the code value;
Short press
to save the code value;
Short press
to exit without saving during the code value setting or return to the previous page;
Long press
&
&
simultaneously for 3 seconds to reboot the controller's setting;
10 seconds without setting,the value will not be saved and exit to the home screen.
19
to raise temperature (0.5°C changed each press).
6.1.5 Icon:
WIFI connection
established
WIFI connection not
established
ESP32 trigger
F
Defrost
C
Filter max. working
time alarm,
disappear after reset
Heating mode
Compressor relay
output active
- Compressor working
- Flashing when the
minimum absolute
100% fresh air
humidity protection
is activated
Humidification
Dehumidification mode
Timer
100% return air
Mixed fresh and
H05=1,temperature in
degrees Fahrenheit
return air
H05=0,
Current humidity
%
temperature in
degrees Celsius
Current air speed,AC 3
Cooling mode
speeds,EC 1~5 speed.
20