DAPAudio D3902 Руководство - Страница 10

Просмотреть онлайн или скачать pdf Руководство для Динамики DAPAudio D3902. DAPAudio D3902 12 страниц.

Odin S-218A Ultra Sub

How to Make a Data Cable

A standard ETHERNET cable can be used to replace the data cable required to transmit data.

Please follow the instructions below in order to create an extra net cable.

Take a standard net cable (CAT-5/ 5E /6) and connect it to the RJ45 connector, as shown in the picture

below (Fig. 04). The wires should now be colored as follows:

Fig. 04

The Odin S-218A Ultra Sub requires almost no maintenance. However, you should keep the unit clean.

Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in

liquid. Do not use alcohol or solvents.

Keep connections clean. Disconnect electric power, and then wipe the connections with a damp cloth.

Make sure connections are thoroughly dry before linking equipment or supplying electric power.

This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps

below in sequence until a solution is found. Once the unit operates properly, do not carry out following

steps.

01) If the device does not operate properly, unplug the device.

02) Check the fuses, power from the wall, all cables, etc.

03) If all of the above appears to be O.K., plug the unit in again.

04) If you are unable to determine the cause of the problem, do not open the device, as this may

damage the unit and the warranty will become void.

05) Return the device to your Dap Audio dealer.

Ordercode: D3902