Addonics Technologies HDUSI3TDR Руководство пользователя - Страница 3
Просмотреть онлайн или скачать pdf Руководство пользователя для Дубликатор дисков Addonics Technologies HDUSI3TDR. Addonics Technologies HDUSI3TDR 18 страниц. 1:11 hdd duplicator pro
Basic Instructions
I.
Installing Drive into the HDD Duplicator
For installing a hard drive on the various enclosures that come with the HDD duplicator, refer to
the bundled enclosure installation guides.
Step 1
Once the hard drive is installed on the drive enclosure, slide in the Source drive into the drive bay. Push
down the handle and using the key provided, turn the key lock to the Lock position. This will secure the
drive and turn on the power to the hard drive.
Step 2
Slide in the Target drive into the drive bay. Push down the handle and using the key provided, turn the key
lock to the Lock position. This will secure the drive and turn on the power to the hard drive.
II.
Connecting the Power Cable and Powering On
a.
Connect the power cord provided from the wall outlet to the back of the tower.
b.
A main power switch is located at the back of the tower. Turn the switch on. Another auxiliary
switch is located on the front of the tower.
c.
Push the auxiliary switch button to turn on the HDD duplicator.
III.
The Duplicator Panel
There are four buttons and an LCD on the panel of HDD Duplicator.
1 – LCD shows a function or a message.
2 – it is used to scroll up function menus.
3 – it is used to scroll down function menus.
4 – it is used to execute a function.
5 – it is used to cancel a function.
IV.
Duplicating a drive
When the duplicator powers on, it initializes and goes through the steps below
Shows the firmware version
HD Duplicator
1-1 Ver:
Detect Drives' status.
Detect Drives
Copy HDD copies data directly from the source hard disk to the target hard disk.
www.addonics.com
Duplicator Panel
Initialize SDRAM's status..
Initialize SDRAM
Shows the first function:
1.Copy HD
Technical Support (M-F 8:30am - 6:00pm PST)
ENT
ESC
Phone: 408-453-6212
Email: www.addonics.com/support/query/
1
2
4
5
3