DAPAudio EVO 8T Руководство - Страница 7

Просмотреть онлайн или скачать pdf Руководство для Динамики DAPAudio EVO 8T. DAPAudio EVO 8T 12 страниц.

EVO 4T/EVO 5T/EVO 6T/EVO 8T

Installation

Remove all packing materials from the EVO. Check that all foam and plastic padding is removed.

Connect all cables.

Always disconnect from electric mains power supply before cleaning or servicing.

Damages caused by non-observance are not subject to warranty.

Before plugging the unit in, always make sure that the power supply matches the product specification

voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.

01) Turn the controls on the rear of the speakers to select the desired power tap: 2/4/8/16W (EVO 4T/5T),

4/8/16/32W (EVO 6T) or 6,25/12,5/25/50W (EVO 8T). It will also determine the volume. The higher the

setting, the higher the volume.

02) Connect the common cable (black) from your 100V amplifier to the black connector on the EVO.

03) Connect the main feed cable (red) from your 100V amplifier to the red connector on the EVO.

Ordercode: D3680/D3681, D3682/D3683, D3684/D3685, D3686/D3687

Fig. 02