DAPAudio MHS-80S Руководство - Страница 7
Просмотреть онлайн или скачать pdf Руководство для Динамики DAPAudio MHS-80S. DAPAudio MHS-80S 8 страниц.
Печатать страницу
MHS-80S
Troubleshooting
No Sound
Always check if all the cables and cords are connected. Always turn off power to the area before
checking the wires, to prevent electric shock.
If everything works properly and there is still no sound, revisit the manufacturer's instructions to make sure
they were followed during installation. If everything was installed correctly and there is still no sound, you
may want to consider bringing in a professional to take a look at your speakers.
Sound Warping
If the sound coming out of your loudspeaker is loud enough, but seems to be warped or distorted, your
treble or bass levels may need to be adjusted.
Too much treble can make the sound bounce off of fixtures in the room, making it tinny sounding.
With the bass, if the loudspeaker is too close to a wall and is not aimed properly, then you will need to set
the bass to minus, to stop the low tones from bouncing off of the walls or large pieces of furniture.
Product Specification
Power taps:
Line voltage:
Impedance:
Frequency response:
Sensitivity:
Housing:
Color:
IP rating:
Dimensions:
Weight:
Dimensions
Design and product specifications are subject to change without prior notice.
Ordercode: D6546
10/20/40/80W
100V
8 Ω
90-20 kHz
99 dB
ABS
Gray
IP66
325 x 353 x 353 mm (LxWxH)
5,4 kg
Website:
www.Dap-audio.info
Email:
6