Duratax NITRO DEMON Руководство по сборке и эксплуатации - Страница 8

Просмотреть онлайн или скачать pdf Руководство по сборке и эксплуатации для Игрушка Duratax NITRO DEMON. Duratax NITRO DEMON 20 страниц.

❏

10. Install the servo horn onto the throttle servo,

note the direction of the servo horn. Secure the

horn to the servo with the screw included with the

radio system.

❏

11. Remove three of the arms off the steering servo

horn as shown.

❏

12. Install the servo horn onto the steering servo,

note the direction of the servo horn. Secure the

horn to the servo with the screw included with the

radio system.

❏

13. Route the wires and connectors for the switch

and two servos through the hole in the radio box. Cut

a piece of foam the size of the radio box and place it

in the bottom for all of the equipment to set on. Make

sure that all of the wires coming into the radio box are

on top of the foam. This is to help prevent vibration

damage to the receiver.

❏

14. Install the receiver into the radio box and route

the antenna wire through the same hole the servo

leads come in. Run the antenna wire up through the

antenna mount hole.

❏

15. Plug the steering servo, throttle servo and

switch into the receiver. See your radio instructions to

determine which channel is steering and which is

throttle. Plug the switch into the battery socket.