DAPAudio PA-805CDTU Руководство пользователя - Страница 8
Просмотреть онлайн или скачать pdf Руководство пользователя для Усилитель DAPAudio PA-805CDTU. DAPAudio PA-805CDTU 20 страниц. 100v 80w amp with cd,tuner usb
Печатать страницу
8. Treble control
Use to adjust the treble frequencies to your preference.
9. Master control
Use to adjust the volume level to your preference.
10. CD holder
Reads normal CD's as wel as MP3 CD's.
11. AC power switch
This is the main Power switch. Press to turn the amplifier on.
12. Mic 1 input
6,3mm mono jack input for connecting a microphone.
13. Priority button
Pushing this button allows you to switch the priority function for channel 1 on or off. If the priority function
is active, all channels except channel 1 will be muted when the Mic 1 (12) input picks up a signal.
14. Chime button
Activates the chime circuit. If pushed in, you can enter chime mode. In chime mode, the chime will be
activated and all inputs except input 1 will be muted so you are able to broadcast a message after the
chime signal.
15. Aux input
3,5mm stereo mini jack input for connecting a line level device such as an I-pod, CD player etc.
16. Tuner
See the next paragraph.
Tuner
Fig. 3
17. AM/FM radio selection button
Pushing this button allows you to select either the AM band or the FM band.
18. Up button
Use this button to select the desired station. If the UP button is pressed for longer than 1,5 seconds, the AM
frequency automatically increases with 9Khz intervals, while the FM frequency automatically increases
with 0,1Mhz intervals, till the radio is tuned in. To stop the selection manually, press the UP button again
during automatically tuning.
19. Display
This display shows the receiving frequency and memory number.
20. Volume -
Push this button to decrease the output level of the tuner.
7