Duratech TS-1640 Руководство пользователя - Страница 3
Просмотреть онлайн или скачать pdf Руководство пользователя для Паяльный пистолет Duratech TS-1640. Duratech TS-1640 4 страницы.
Печатать страницу
CAUTION
The manufacturer assumes no liability for uses other than those described in the
operating instructions or for unauthorized alterations.
The operating instructions and cautions should be read carefully and kept in an
easily visible location in the vicinity of the control system. Non-observance of the
cautions will result in accidents, injury or risks to health.
Avoid touching grounded parts with your body, e.g. pipes, heating radiators and
so on. The grip of antistatic designed soldering tool is conductive.
Do not use the soldering tool in a moist or wet environment. The soldering iron
should be placed on the holder after finished using.
The power cord only can be inserted in approved power sockets or adapters.
The temperature of the soldering tip will reach as high as around 400℃ 752℉)
when the power switch is on. Since mishandling may lead to burn and fire, be
sure to comply with the following precautions: - Do not touch metallic parts near
the soldering tip/ nozzle.
This appliance is not intended for use by young children and infirm persons
unless they have been adequately supervised by a responsible person to ensure
that they can use the appliance safely.
Young children should be supervised to ensure that they do not play with the
appliance.
A fire may result if the appliance is not used with care, therefore: - be careful
when using the appliance in places where there is combustible material; - do not
apply to the same place for a long time; - place the appliance on its stand after
use; - allow it to cool down before storage; - do not leave the appliance
unattended when it is switched on. - unused soldering tools should be stored in a
dry location which is out of the reach of children. Switch off all unused soldering
tool.
MAINTENANCE
Do not use this tool for any applications other than soldering or desoldering.
Do not tap the iron against the work bench or otherwise subject the iron to
severe shocks.
Do not file the soldering tip to remove oxide, please use tip cleaner or the
cleaning sponge provided. (tin the tip before storing away).
Please turn off the power before connecting or disconnecting the soldering iron.
Discontinue any further use if control station or soldering iron or cabling are
damaged or worn.
3