DAPAudio Sessionmix 6 Руководство - Страница 13

Просмотреть онлайн или скачать pdf Руководство для Музыкальный микшер DAPAudio Sessionmix 6. DAPAudio Sessionmix 6 18 страниц.

21. LED VU meter

22. Main mix

This control allows you to adjust the main mix level.

26. Control room out stereo unbalanced

27. Tape in stereo RCA

28. Tape out stereo RCA

29. Power On/Off

Do not supply power before the whole system is set up and connected properly.

30.

Remote Power Supply Input Socket

This is the remote AC power supply input socket for the Sessionmix 6. It is a special three core socket.

Please use the supplied DAP audio adapter only.

31. Phantom Power Switch

Press this button to turn the phantom power +48V on. Do not connect any unbalanced microphones with

the phantom power switched on. The red Phantom LED (15) will light if the phantom power is activated.

23. Aux returns

Use this output in combination with the aux 1 returns

on the back to connect an external effect device.

24. Aux send

Use this output in combination with the aux returns

to connect an external effect device.

25. Phone out

You can connect a pair of headphones with a

minimum impedance of 32 Ohm to this stereo 1/4"

Fig. 10

jack should be wired as Tip=left, Ring=right and

sleeve=ground.

Fig. 11