Duratool D03405 Руководство - Страница 6

Просмотреть онлайн или скачать pdf Руководство для Измерительные приборы Duratool D03405. Duratool D03405 8 страниц. Handheld anemometer

Barometric
When user select the barometric display, the anemometer will measure and update the barometric
every 3 seconds in the first 3 minutes. After 3 minutes, the updating interval becomes 1 minute. And
the ABS/REL altitude will be calculated based on barometric values.
Note: The barometric will show" --.-" if the barometric is out of the range 600-1100hPa.
Note: If no button operation within 24 hours under altitude mode, it power off automatically.

8. SET Mode

Press and hold the "SET" key for 2 seconds to enter the setting mode.
(1) The wind speed unit will display and flash. Press "+" key to cycle among m/s, Km/h, mph, Knots
and ft/min. Press "SET" key to confirm and advance to the next step.
(2) The temperature unit will begin flashing. Press "+" key to cycle between °C and °F. Press "SET"
key to confirm and advance to the next step.
(3) The barometric unit will begin flashing. Press "+" key to cycle among hPa, inHg, mmHg. Press
"SET" key to confirm and advance to the next step.
(4) The altitude unit will begin flashing. Press "+" key to cycle between m, feet. Press "SET" key to
confirm and advance to the next step.
Set Wind speed unit
Set temperature unit
Set barometric unit
Set altitude unit
Long press the "SET" key to exit the Setting mode and enter to measuring mode. Press and hold the
"SET" key for 4 seconds can enter the Power Off status,
Note:If no key operation in 15s, the unit will return to the normal mode automatically.

9. Other features

9.1 Beaufort wind scale (bft)
The Beaufort scale is displayed in bar graph (0-12). This is a system for estimating wind force
without the use of instruments based on the visible effects of the wind on the physical environment.