Duratuf KL1 Инструкция по сборке Руководство - Страница 11

Просмотреть онлайн или скачать pdf Инструкция по сборке Руководство для Хранение на открытом воздухе Duratuf KL1. Duratuf KL1 16 страниц. Kiwi series

Step 1: Position Door Track (107) on front wall 55mm

down from underside of Roof, with left hand

end flush with the left hand door jamb. Pre-drill

hole in centre and rivet in place. Remove ALL

drill filings

Step 2: Hang door in Door Track. At the right hand

end of Door Track, adjust up or down so that

the Door hangs parallel with shed. Fit one

rivet at right hand end to hold in place. Repeat

with left hand end of track.

Step 3: Remove Door. Pre-drill holes into each Rib

and at similar spacings into Over Door Flash-

ing. At approximately 1/3 in from each end of

Door Track put a 50mm nail. Fix rivets to rest

of holes

Step 4: Clean out ALL drill filings. Also make sure

the Wheels are cleaned of drill filings. Re-

hang Door, then insert door stops into the

pre drilled holes at end of tracks as shown in

diagram. Tighten with two spanners.

KL3 DOOR

Nut

Washer

Aluminium

Door Stop

Door Track

Washer

Bolt