Duratuf PG88 Инструкция по сборке Руководство - Страница 14

Просмотреть онлайн или скачать pdf Инструкция по сборке Руководство для Хранение на открытом воздухе Duratuf PG88. Duratuf PG88 17 страниц.

Печатать страницу

ROOF ASSEMBLY CONT...

STEP 3:

• Position 1 x roof sheet so that the top of the sheet is at the

centre of the Ridge Beam and the side of the sheet over hangs

the end of the Ridge Beam and the Top Plate by 15mm.

• Ensure the Ridge Beam and the Top Plate are straight.

• Nail/screw 4 x corners of the Roof Sheet as shown, ensuring

the ribs on the Roof Sheet line up with the front Roof Sheet and

the back Wall Sheet. Fasten off the first sheet.

STEP 4:

• Position the second Roof Sheet, and rivet to first roof sheet as

shown.

• Fasten off as per Step 2.

• Rivet and nail/screw off the remaining Roof Sheets, ensuring the

ribs line up with the front Roof Sheets and the back Wall Sheets.

STEP 5:

• Place barge flashings on roof at end of shed ensuring

the diagonal trimmed end is facing out. (See diagram

on pg 5)

• Rivet the Barge Flashings to the roof and the side

wall, using four rivets on top of barge and four into the

side (fig.3).

STEP 6:

• Rivet the 2 Ridge Caps together using 4 rivets, so

total flashing is 2.550m long. Rivet the Ridge

Flashing to the centre of the roof using 8 x rivets

as shown (fig.2).

STEP 7:

• Place spouting in position and rivet to Barge Flashings

at each end and rivet to roof sheets (1 rivet per 1 sheet)

(fig.4).

SIDE

WALL

SIDE

WALL

SIDE

WALL

Barge

X 4

fig.3

TOP PLATE

BACK WALL

BOTTOM PLATE

SIDE

WALL

FRONT WALL

TOP PLATE

BACK WALL

BOTTOM PLATE

SIDE

WALL

FRONT WALL

fig.1

= Clout

= Screw

TOP PLATE

BACK WALL

BOTTOM PLATE

RIDGE BEAM

FRONT WALL

fig.2

Spouting

SIDE

WALL

fig.4