Duratuf PS42 Инструкция по сборке Руководство - Страница 8
Просмотреть онлайн или скачать pdf Инструкция по сборке Руководство для Хранение на открытом воздухе Duratuf PS42. Duratuf PS42 16 страниц. Base size: 1.520m x 0.685m
Печатать страницу
ASSEMBLE DOOR
SELECT:
2 x 1.850 m Door Sheets (Narrow)
2 x 0.945 m Door Top/Bottom Flashings
2 x 1.850 m Door Side Flashings
3 x Hinges
1 x Padbolt Support Flashing
2 x 1.160 m Door Brace Flashings
59 x Rivets
STEP 1:
•
Lay out door sheets on a flat surface
making sure narrow pans are on the
outside.
•
Rivet sheets together in the centre en-
suring ends are flush with each other.
STEP 2:
•
Position door side flashings and top
and bottom flashings and assemble
door as shown.
•
Drill and rivet as per diagram.
STEP 3:
• Attach hinges to door side flashing using rivets provided.
Ensure hinge is flush with back of door, and 60mm in from
each end as per fig.2.
• Using one rivet, attach padbolt support as shown in fig. 1.
STEP 4:
• On the back of the door, place door braces in posi-
tion as shown in fig.3.
• Ensure that the top and bottom ends of the braces
are under the door flashings as shown in fig.4. and
opposite ends of the braces overlap in the middle.
• Rivet door brace flashings onto back of door as
shown. Where possible, rivet from front of door.
fig.2
Hinges
fig.4
7
fig.1
NARROW PANS
fig.3