Duratuf SG2520 Инструкция по сборке Руководство - Страница 12

Просмотреть онлайн или скачать pdf Инструкция по сборке Руководство для Хранение на открытом воздухе Duratuf SG2520. Duratuf SG2520 16 страниц.

Печатать страницу

ROOF ASSEMBLY

SELECT:

5 x 2.200 m Roof Sheets

2 x 2.555 m Spouting

4 x 1.100 m Barges

2 x 1.555 m Ridge Flashing

1 x 2.520 m Ridge Beam

2 x 0.200 m Jack Studs

8 x 75mm Screws

38 x 40mm Weatherseal Nails

62 x Rivets

STEP 1:

 Place the Ridge Beam on a level surface and use 2 x 75mm

screws to secure the Jack Studs to the underside of the Ridge

Beam, one at each end (fig. 1).

 Turn the Ridge Beam /Jack Stud assembly over and place it

on the timber Top Plate in a central position.

 Secure with 2 x 75mm screws through the top of the Jack

Studs into the Timber Top Plate (fig. 2).

STEP 2:

 Position the first roof sheet with the centre slots over the

middle of the Ridge Beam. Gently fold the roof sheet over

the Ridge Beam so that the ends touch the front & back Top

Plates.

 Repeat with second roof sheet.

 Rivet sheets together at overlaps ,one rivet either side of the

ridge beam (fig. 3).

 Repeat with remaining roof sheets

IMPORTANT—FOR SHEDS WITH OPTIONAL CLEAR

ROOF PANEL

Assemble as below, making sure that the Clear Roof Sheets

overlap the standard roof sheets on both sides.

The Clear Roof Panel must be secured to the Top Plate and the

Ridge Beam. Pre drill and fasten with the 40mm weatherseal

nails provided..

SIDE

WALL

fig. 1

fig. 2

RIDGE BEAM

JACK STUD

TOP PLATE

fig. 3

TOP PLATE

BACK

WALL

BOTTOM PLATE

SIDE

WALL

RIDGE BEAM

FRONT

WALL