Duratuf SG2520 Инструкция по сборке Руководство - Страница 7

Просмотреть онлайн или скачать pdf Инструкция по сборке Руководство для Хранение на открытом воздухе Duratuf SG2520. Duratuf SG2520 16 страниц.

ASSEMBLE DOOR

SELECT:

2 x 1.810 m Door Sheets (Narrow)

2 x 0.945 m Door Top/Bottom Flashings

2 x 1.810 m Door Side Flashings

3 x Hinges

1 x Padbolt Support Flashing

2 x 1.160 m Door Brace Flashings

54 x Rivets

STEP 1:

 Lay out door sheets on a flat surface

making sure narrow pans are on the

outside.

 Rivet sheets together in the centre en-

suring ends are flush with each other.

STEP 2:

 Position door side flashings and top

and bottom flashings and assemble

door as shown.

 Drill and rivet as per diagram.

STEP 3:

 Attach hinges to door side flashing using rivets provided.

Ensure hinge is flush with back of door, and 60mm in from

each end as per fig.2.

 Using one rivet, attach padbolt support as shown in fig. 1.

STEP 4:

 On the back of the door, place door braces in posi-

tion as shown in fig.3.

 Ensure that the top and bottom ends of the braces

are under the door flashings as shown in fig.4. and

opposite ends of the braces overlap in the middle.

 Rivet door brace flashings onto back of door as

shown. Where possible, rivet from front of door.

fig.2

fig.4

fig.1

NARROW PANS

fig.3