Duratuf KIWI MK4B Инструкция по сборке Руководство - Страница 5

Просмотреть онлайн или скачать pdf Инструкция по сборке Руководство для Газонное и садовое оборудование Duratuf KIWI MK4B. Duratuf KIWI MK4B 18 страниц.

Печатать страницу

Note:

For sheds with the Raised Floor Modification option the studs will be 1.780m long to allow the Wall Sheets to pro-

trude 20mm below the Bottom Plate. Refer to Raised Floor Modification section (Page 15).

Step 1: Back Wall: Select one 4.210m Base Plate (Green), one

4.210m Top Plate (Red) and six Studs (Yellow). Lay out Plates

and two Studs on a flat surface and nail together using two

75mm nails per join. Nail in remaining centre studs using Nogs

to get correct position. Position Nogs centrally between Top

and Bottom Plates and nail in place. (All Plates, Studs and

Nogs are joined together with two 75mm nails each end).

Step 2: Front Wall: Select one 4.210m Base Plate (Green), one

4.210m Top Plate (Red), four Studs (Yellow) and two

1.185m Nogs. Nail studs to each end of Plates. Nail in re-

maining two studs using 1.185m Nogs to get correct posi-

tion. Position Nogs centrally between Plates and nail in

place.

Step 3: End Wall: Select one 3.380m Base Plate (Green), one

3.380m Top Plate (Red), three Studs (Yellow) and

two .789m Nogs. Lay out Plates and one Stud on a flat sur-

face and nail Stud centrally between Plates. Nail remaining

Studs to Plates using .789m Nogs to get the correct posi-

tion. Position Nogs centrally between Plates and nail in

place. Repeat with second End Frame.

MK4B TIMBER FRAME

JACK STUDS