DuraVent DIS1 Руководство - Страница 12
Просмотреть онлайн или скачать pdf Руководство для Вентиляция DuraVent DIS1. DuraVent DIS1 20 страниц. Ul 1978 - grease duct professional series kitchen ventilation
Печатать страницуDRAIN LENGTH (DL) – VERTICAL
Used to drain grease or condensate from the inner wall on
vertical runs. There is a channel inside the inner wall for
directing the flow. A 1" NPT nipple is provided.
Figure 21: Vertical Drain Length
DRAIN LENGTH (HDL) – HORIZONTAL
Used as a horizontal drain in grease duct applications. There
is a DAM inside the inner wall for directing the grease to the
drain. A 1" NPT nipple is provided.
Figure 22: Horizontal Drain Length
NOZZLE LENGTH (NL)
Used to insert a fire-suppression or wash down nozzle. A 1"
NPT nipple is provided.
Figure 23: Nozzle Length
12
CIXPRO SERIES FOR GREASE DUCT UL1978 SUBMITTAL RECORD
NO TOOL ACCESS DOOR (ADL)
Used for inspection and cleaning. Greaseproof and fire-tight
seal.
Available in two lengths: 26" and 36" to accommodate spaces.
Figure 24: No Tool Access Door
NO TOOL ACCESS TEE CAP (NTTC)
Used to close and seal unused tee ports. Provides easy
access for inspection.
Figure 25: No Tool Tee Cap
ELBOWS – E3, E15, E30, E45 and E90
Used to change direction of the duct or to provide an offset.
Available in 3°, 15°, 30°, 45° and 90° configurations.
Elbows are not designed to take bending loads or thermal
expansion.
Figure 26: 3° elbow
Figure 28: 30° elbow
REV: 0
AUGUST 2017
Figure 27: 15° elbow
Figure 29: 45° elbow
12