Contemporary Research QMOD-HDMI RGB Руководство по эксплуатации - Страница 6

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Усилитель Contemporary Research QMOD-HDMI RGB. Contemporary Research QMOD-HDMI RGB 17 страниц. Hd modulator-iptv encoders
Также для Contemporary Research QMOD-HDMI RGB: Руководство по установке (11 страниц), Руководство по эксплуатации (16 страниц)

Печатать страницу

Front Panel Menus and Web Pages

The following menus are the same for all QMOD HD Modulators/IPTV Encoders. We will base the examples on the QMOD-HDMI 1.5,
the unique video and audio input selections are noted on Page 4.
•
Front Panel. Press the SETUP button use the Up/Down buttons to move through menus, Left/Right to change settings, then
press SELECT to store the changes at each step.
o
Select a menu group (Quick, A, B, Common, Advanced), then SELECT to view that group's menus
o
Press SETUP to move back to other menu groups
o
Pressing the left and right buttons together will reboot the unit
•
Ethernet. Access the onboard Web pages. Helpful for remote access when system is fully integrated with site.
•
USB-Web. Access Web pages from front-panel USB port, simplest solution for full setup, requires no IP setup or connection,
connect from the front of the equipment rack.
Front Panel Menus
There are five groups of menus you can choose from:
•
Quick Setup supplies just the few steps needed to output the source as a channel.
•
Program A goes deeper in to all the options for the first source
•
Program B does the same for the second program
•
Common menus set the core values for the entire QMOD, such as IP address, LCD and RF settings
•
Advanced menus set special options for Program A and B, Common settings

Quick Setup Menus

This series is designed for a quick setup for testing and integration. (Example is QMOD-HDMI RGB)
Channel
Sets the physical channel, 2-135
RF Level dB
Sets the RF level for the channel
29 | 25 | 21 | 17 | 13 | 9
Video A Inpt
Selects the video input for Program A
HDMI 1| YPbPr 1 | RGBHV 1| Video 1| Video 2
Audio A Inpt
Selects the audio input for Program A
None | HDMI 1| SPDIF 1 | SPDIF 2 | Analog 1| Analog 2
Video B Inpt
Selects the video input for Program B (if enabled)
None | HDMI 1 | YPbPr 1| RGBHV 1| Video 1| Video 2
Audio B Inpt
Selects the audio input for Program B (if enabled)
None | HDMI 1| SPDIF 1 | SPDIF 2 | Analog 1| Analog 2
At this point, you should be able to view the QMOD channels on a test TV. Note that setting Video B input to None will automatically
put the encoder in to single-channel mode, and revert to 2-channel mode when inputs are selected for Program A and B.
A QMOD channel, or any QAM channel, can include two video streams, called Programs. It's really one stream that contains both
videos. The TV figures out which to play using the channel ID, typically something like channel IDs 2.1 and 2.2, 3.1 and 3.2 and so on.
For marketing purposes, we use the popular term "2-Channel" the general public understands, for integrators we use the more correct
term "2 Programs".
Contemporary Research
6
QMOD Modulators HD/IPTV Encoders