49er Communication PABA1417 Руководство пользователя - Страница 2

Просмотреть онлайн или скачать pdf Руководство пользователя для Зарядное устройство 49er Communication PABA1417. 49er Communication PABA1417 3 страницы. Six-unit rapid charger

Печатать страницу

Charger Features

1. Power supply.

2. Six-unit rapid charger.

3. Removable charging pod (shown for first

position only).

4. Charge status LED (shown for first

position only).

5. Power on / off switch.

6. Connection point for power.

Replacing A Charging Pod

The charging pod is made from quality materials and

designed to provide years of service when properly used.

In most cases, the charging pod will only be replaced when you want

to use the charger with a different battery.

Follow these steps to change the charging pod:

1. Obtain a charging pod made specifically for this charger. Confirm that the charging pod is compatible with the battery you want to

charge.

2. If connected, unplug the power supply from the charger.

3. Turn the locking screw on the bottom of the charging pod counter-clockwise until it no longer holds the pod. Lift the charging pod

and the screw from the charging base.

4. Before placing the replacement pod in the charger, make sure the contacts on the bottom of the pod are aligned with the contacts

in the charger. After the replacement pod is inserted into the charger base, secure with the locking screw. Do not over tighten the

screw.

5. Inspect the charging contacts in the pod to ensure they are clean and unobstructed.

6. Connect the DC plug from the power supply cable to the charger and insert the AC cord into a wall outlet. You are now ready to

charge a battery compatible with the charging pod.

Charging A Battery

1. Confirm that the charging pod and battery are compatible.

2. Connect the DC plug from the power supply cable to the charger, then insert the AC power cord into a wall outlet.

3. Place battery to be charged in the charging pod. The battery may be charged while attached to the radio. Note: If the battery is

attached to the radio, charging time will be reduced if the radio is powered off.

4. When a battery is placed in the charging pod, the charge status LED will illuminate ORANGE for a short period while the charger

performs a battery diagnostic. Once completed, the charge status LED will change to RED. This indicates the battery is charging.

5. While a battery is charging, the charge status LED will illuminate RED with no flashing. If the charge status LED is RED and flashes,

a fault has been detected. The flash pattern represents a specific fault condition. See section on Fault Conditions for details.

6. When the battery is charged to 80% of capacity, the charge status LED will change to GREEN and begin to flash. It is recom-

mended that the battery be charged to at least 80% capacity before use.

7. The charge status LED will illuminate GREEN with no flashing when the battery is fully charged.

8. When a fully charged battery is removed, the status LED may remain illuminated for a few seconds. Allow the charge status LED

to go off before placing another battery in the charging pod.

9. This charger is designed to operate at room temperatures between 15°C and 30°C (59°F – 86°F). Do not charge batteries below

0°C (32°F) or above 45°C (113°F).

FOR RECHARGEABLE TWO-WAY RADIO BATTERIES – NiCd / NiMH / Li-Ion / LiPo

SIX-UNIT RAPID CHARGER

Model: PABA1417

USER MANUAL

Note: Quick reference

information for charge

status LED is located on

front of charger.