Aplisens PC-29B Руководство пользователя - Страница 2

Просмотреть онлайн или скачать pdf Руководство пользователя для Аксессуары Aplisens PC-29B. Aplisens PC-29B 20 страниц. Pressure transmitters

Symbols used

Symbol

Warning to proceed strictly in accordance with the information contained in the

documentation in order to ensure the safety and full functionality of the device

Information particularly useful during installation and operation of the device

Information particularly useful during installation and operation of Ex

versions

Information on disposal of used equipment

BASIC REQUIREMENTS AND SAFE USE

In order to minimise the risk of malfunction and associated risks to personnel, the

device is not to be installed or used in particularly hostile conditions, where the

following risks occur:

When using the device in potentially explosive areas, observe technical

requirements specified in this manual and applicable local (national) regulations

Changes in the manufacture of transmitters can overtake the update's paper documentation.

Current manuals can be found on the manufacturer's website at

 The manufacturer will not be liable for damage resulting from incorrect

installation, failure to maintain the device in a suitably functional condition, or

use of the device other than for its intended purpose.

 Installation should be carried out by qualified personnel having the necessary

authorisation to install electrical and pressure measuring devices. The

installer is responsible for performing the installation in accordance with these

instructions and with the electromagnetic compatibility and safety regulations

and standards applicable to the type of installation.



In the installation with control and measurement instruments exists, in case of

leakage, a risk to personnel on the side where the medium is under pressure.

All safety and protection requirements must be observed during installation,

operation and inspections.



If a device is not functioning correctly, disconnect it and send it for repair to

the manufacturer or to a firm authorised by the manufacturer.

 Possibility of mechanical impacts, excessive shocks and vibration;

 Excessive temperature fluctuation;



Condensation of water vapour, dust, icing.

Description