APLOS R0-5050 Руководство по эксплуатации - Страница 14
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Системы фильтрации воды APLOS R0-5050. APLOS R0-5050 20 страниц. 5 stage reverse osmosis drinking water system, 50gpd
Печатать страницу8. Filter Replacement Guide
1.
Shut off feed valve 5 and tank valve 6.
CAUTION! Dissemble while under water pressure can result in flooding!
2.
Wash your hands with antibacterial soap.
3.
Unscrew with the sump wrench 10 first and second sumps in water flow
direction (right to left). Be careful as the sumps are filled with water.
4.
Remove the used filter cartridges.
5.
Wash housings with soap and a clean sponge, then rinse
thoroughly with water.
6.
Insert the new cartridges in the first and second sumps by water flow
direction.
Disconnect the tube stemming from the third sump from the auto
7.
shut-off valve.
8.
Open the feed valve 5 and let through the first two installed cartridges 5-7
liters (1.5-2 Gallons) of water to rinse the
coal dust that may be produced in cartridges during shipping.
CAUTION! This water will pour through the tube disconnected from auto
shut-off valve, prepare a vessel to collect it.
9.
Remove the third pre-filter's sump from filter head. Be careful as it is filled
with water.
10.
Remove the used filter cartridge and wash the sump with unflavored soap
and a clean sponge, then rinse thoroughly
with water.
11.
Insert new cartridge into the third sump. Screw the sump back on and let
through at least 4 more liters of water to flush the coal dust. Close the feed
valve 5 and connect the previously separated tube with the auto shut-off
valve.
12.
Open the tank valve 6.
13.
Open the feed valve 5.
14