Apogee MQ-650 Руководство пользователя - Страница 9

Просмотреть онлайн или скачать pdf Руководство пользователя для Измерительные приборы Apogee MQ-650. Apogee MQ-650 20 страниц. Underwater epar meter

DEPLOYMENT AND INSTALLATION

Apogee MQ series ePAR meters are designed for spot-check measurements, and calculation of daily light integral

(DLI; total number of photons incident on a planar surface over the course of a day) through the built-in logging

feature. To accurately measure PFD incident on a horizontal surface, the sensor must be level. The AL-100

accessory leveling plate is recommended for use with the MQ-650 to ensure the sensor is level when attached to a

cross-arm. The bubble-level in the plate makes leveling simple and accurate.

The AM-310 Sensor Wand accessory incorporates a mounting fixture at the end of an extendable telescopic wand

(up to 33 inches/84 cm). The wand is not suited for wet environments; however, it is excellent for greenhouses and

growth chambers. Its ability to retract to a smaller size also makes it ideal for travel use.

The AM-320 Saltwater Submersible Sensor Wand accessory incorporates a mounting fixture at the end of a 40-inch

segmented fiberglass wand and is well-suited for saltwater use. The wand allows the user to place the sensor in

hard-to-reach areas such as aquariums.

NOTE: The handheld meter portion of the instrument is not waterproof. Do not get the meter wet or leave the

meter in high humidity environments for prolonged periods of time. Doing so can lead to corrosion that could void

the warranty.

MQ-650 sensor attached to an AL-100

leveling plate.

AM-310 Extendable Sensor

Wand

AM-320 Saltwater Submersible

Sensor Wand