Apollo Sprayers ECO TrueHVLP series Руководство по эксплуатации - Страница 3

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Краскопульт Apollo Sprayers ECO TrueHVLP series. Apollo Sprayers ECO TrueHVLP series 10 страниц.

Печатать страницу

CONGRATULATIONS! You have just purchased the finest HVLP Spray system available. You are

about to enjoy the great benefits of TrueHVLP™ spraying, flawless applications and a very short

learning curve. Our designs are the result of many years experience in manufacturing TrueHVLP™

Turbine spray systems, and TrueHVLP™ spray guns.

Whether you are new to spraying, you have sprayed before, or are just new to HVLP spraying; there

are some basic spraying guidelines that will help you to achieve the best results and optimum

success from your new equipment. Reading this information carefully and following these simple

steps will ensure that you get the best performance and results from your new spray system.

INSTRUCTIONS

Check the contents of your box. The following are included:

1. Turbine Spray unit

2. Spray Gun

3. Air hose

4. Instruction Manual

5. Electric Cord

HOW YOU'RE ECO SERIES TRUEHVLP™ SPRAY SYSTEM WORKS

Your Apollo ECO Series TrueHVLP™ Spray System has three components: the turbine unit, an air

hose and the spray gun. The Turbine unit, when connected to the correct electrical power supply and

with the on/off switch in the "on" position provides a continuous source of clean, warm, dry, low-

pressure turbo air. The air hose connects the Turbine unit to the spray gun. Air flows through the

hose to the nozzle of the specially designed Apollo ECO spray gun. Atomization of the

material/coating is achieved when the high CFM of airflow mixes with the stream of fluid passing

through the specialty designed tip/nozzle. This low-pressure atomization principle achieves minimum

misting (overspray) to the spray environment and maximum solution transfer efficiency to the

substrate because of less "Bounce Back". The Turbine has one air hose outlet on the side of the unit

and is designed to run one spray gun.

Conventional Spray Systems

Conventional spray systems:

12-20 PSI @ 8 CFM

30-50% transfer efficiency

- Excessive, costly Solution waste

- Unhealthy for operator and

harmful to the environment

Bounce Back Comparisons

Apollo ECO TrueHVLP™ Spray System

TrueHVLP™ Spray System

7.0 PSI @ 85 CFM

- Up to 90% transfer efficiency

Substantial Solution savings

Cleaner and safer for both

operator and environment