4Ddoors 4DR1 v4 Инструкции по установке и руководство пользователя - Страница 6

Просмотреть онлайн или скачать pdf Инструкции по установке и руководство пользователя для Система открывания дверей 4Ddoors 4DR1 v4. 4Ddoors 4DR1 v4 20 страниц. Roller door operator

4Ddoors 4DR1 v4 Инструкции по установке и руководство пользователя
I
I
NSTALLATION
NSTRUCTIONS
1. Fit anti-coning collar TIGHT TO SHAFT against drum at
opposite end of curtain to the motor using anti-coning clip
supplied in kit as shown in Fig.1.
2. Left off about pinning the curtain to the drum wheel.
Ensure the curtain is pinned to the drum wheel.
3. Roll up door with at least 100mm of curtain hanging down
in the tracks.
4. Ensure that the U-bolt on the end of the door opposite the
end to which the operator is to be fitted is tightened
securely. This U-bolt holds all the spring tension on the
door once the other U-bolt is released.
5. Slide drive unit onto shaft as shown in Fig.2. Ensure the
drive forks engage fully with the narrowest spoke on drum
wheel.
6. For ease of installation, the sun gear can be disengaged
for free rotation by pulling the Emergency Release handle
downwards. To re-engage and lock the sun gear, pull down
on the handle once again until a "click" is heard.
Caution : Operator must be ENGAGED before
proceeding further installation.
Emergency Release
6
Engage - Pull down the release cord firmly with 'click'
(handle is on same level as bottom of the operator)
Disengage - Pull down the release cord firmly with 'click'
(handle is below the bottom of the operator)
Fig.1
Fig.2