AddSecure Tor V Руководство по установке - Страница 7

Просмотреть онлайн или скачать pdf Руководство по установке для Передатчик AddSecure Tor V. AddSecure Tor V 20 страниц. Alarm transmitter

4.3

Antenna for wireless communication

Use the external antenna as needed, and place it so that the reception is satisfactory (do not

place in a metal cabinet). Connect the antenna directly into the FME female socket. If the

antenna is placed 5–10 meters from the alarm transmitter, use a coaxial cable of the type RG58.

Note that with wireless transfer over a mobile data network, there must be satisfactory

radio coverage. See the signal strength using a computer (see the appendix) or LEDs

during installation (see 6.8). Satisfactory signal strength is between 14 and 32.

Relieve the various cables (the ones connected to the alarm transmitter) of

stresses by securing them outside the encasement, approximately 10

centimeters away. The plastic encasement also has prepared holes for cable

ties on the bottom of the case.

When the plain text function or analogue dialler from the control panel is

used, the external antenna must always be used so that the telecommunication

signals from the control panel are not disturbed.

AddSecure Tor V, PDK-11606