DataBay ET-HK0101-TC Руководство пользователя - Страница 6

Просмотреть онлайн или скачать pdf Руководство пользователя для Удлинитель DataBay ET-HK0101-TC. DataBay ET-HK0101-TC 10 страниц. Hdmi over single cat-5 extender kit with ir

Печатать страницу

Panel Descriptions

ET-HK0101-TC Front View

HDMI IN:

Connects to a HDMI source with a HDMI Male-Male cable here

MODE:

0 = [Video] – supports up to HDMI 1.3 output. [Audio] – supports up to 7.1ch output

1 = [Video] – supports up to HDMI 1.3 output. [Audio] – locks to stereo audio output

2 = [Video] – locks to HDMI 1.2 output. [Audio] – supports up to 7.1ch output

3 = [Video] – locks to HDMI 1.2 output. [Audio] – locks to stereo audio output

4 = [Video] – DVI display mode. [Audio] – no audio output

5 = [Safe Mode] – uses default EDID

6 = [Default Mode] – uses default EDID

7 = [EDID Learning Mode] – learns EDID

Note for EDID (Extended Display Identification Data) learning

1. If you cannot get the audio/video output from the connected display from the

first time setup. Please follow the instructions below to check if the extender

is OK:

Step 1 – Please set the rotary arrow on TX at

for the LED of the RJ-45 connector blinks for a couple seconds.

Step 2 – Please turn the rotary arrow counterclockwise [ ] from

Mode

at this setting for 720p or 1080i and stereo audio. If you need to get

720p/1080i with 7.1ch audio output, please turn the rotary arrow

counterclockwise [ ] from

output, please check Note#2. If you still cannot get the audio/video

out normally, please go on the next step.

Step 3 – Please turn the rotary arrow counterclockwise [ ] from

Mode

dims and then lights again.

Step 4 – Please turn the rotary arrow clockwise [] from

You should have normal audio/video output. If not, please contact

technical support.

with video supported up to 720p/1080i

with video supported up to 1080p

from the display

3. If you can get audio/video from the display, you can stay tune

Mode 3

7. Wait a few seconds until the LED of the RJ-45 connector

6 / 10

"Mode

5" for Safe Mode, and wait

Mode 5

Mode

2. For better audio/video

Mode 3

Mode 7

Mode