4iiii FLiiiight Руководство по обновлению - Страница 3

Просмотреть онлайн или скачать pdf Руководство по обновлению для Оборудование для фитнеса 4iiii FLiiiight. 4iiii FLiiiight 10 страниц.

1. Confirm that the 2 set

screws protrude slightly from

the load cell. If they do not,

insert the 3mm Allen Key into

the screw hole from the rear

side through the plastic

shield, and turn the screws to

the right until they protrude

by at least 2 threads.

2. Unscrew the two mounting

bolts on your STAC Zero

resistance unit using your

4mm Allen Key, and remove

the resistance unit.

3. Use the position of your old

resistance unit as your initial

guide for mounting the new

resistance unit. Attach your

Fliiiight resistance unit to the

frame, tightening the 2

mounting bolts enough to

prevent any movement of the

resistance unit until you

perform the alignment steps.