Duronic Mica HV180 Краткое руководство по эксплуатации - Страница 4

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Нагреватель Duronic Mica HV180. Duronic Mica HV180 8 страниц.

Assembly Instructions

Position the heater carefully upside

down.

Attach one leg at a time. Position the

first leg onto the base and align with the

screw holes in the bottom of the heater.

Insert two screws into the base of the

leg and tighten them up fixing the leg in

place securely.

Repeat the same steps to attach the

second leg.

If you wish to add the wheels to the

base, simply align each wheel with the

designated holes on each leg and push

them on into place.

Operation

Please read these instructions in full before

using this heater and retain

for future reference.

Precautions:

Check that the power switch dial is

turned to OFF [O] (figure 1).

Turn the temperature control dial is

turned to OFF (figure 2).

Connecting the Power:

Plug the power cable inot a suitable

mains socket (rated not less than 10

AMP). Once plugged in and the socket

is switched on, the light indicator will turn

on.

Setting the Temperature:

Select the temperature you prefer and

the heater will heat the room to the

chosen temperature and then turn off

automatically.

When the indoor temperature drops

below the set temperature, the heater

will start to work again emitting heat

until the indoor temperature reaches the

desired temperature once again. This

cycle will repeat to maintain your chosen

temperature. The temperature can be

adjusted by simply turning the

temperature control dial to the

temperature you want.