4IPNET EAP110 Руководство по быстрой установке - Страница 14

Просмотреть онлайн или скачать pdf Руководство по быстрой установке для Беспроводная точка доступа 4IPNET EAP110. 4IPNET EAP110 15 страниц. Enterprise access point

Печатать страницу

4IPNET EAP110 Руководство по быстрой установке

Step 4. Configure WDS (Wireless Distribution System) Settings (Optional)

To extend the wireless coverage, EAP110 supports up to 4 WDS links for connecting wirelessly to other

WDS-capable APs (peer APs). By default, all WDS profiles are disabled.

Click on the Wireless main menu button.

Select the Repeater Settings tab.

Choose WDS as the Repeater Type.

Choose the desired WDS profile:

(a) Enable the WDS.

Enter the MAC Address (peer AP) and then Click SAVE.

If you use another EAP110 as the peer AP, simply repeat the above-mentioned steps to configure another

peer AP(s).

On each and every configuration page, you may

Click SAVE to save the changes, but you must reboot the system upon the completion of all

Note:

configuration settings for the changes to take effect. When clicking SAVE, the following message will

appear: "Some modifications have been saved and will take effect after Reboot."

Congratulations!

Now, 4ipnet EAP110 is installed and configured successfully.

After EAP110's network configuration is completed, please remember to change the IP Address of

your PC Connection Properties back to its original settings in order to ensure that your PC functions

properly in its real network environments.

It is strongly recommended to make a backup copy of the configuration settings.

For further configuration and backup information, please refer to the User's Manual.

EAP110 Enterprise Access Point

Quick Installation Guide

ENGLISH

P/N: 11020110815