Addvent AVIMI200 Руководство пользователя - Страница 6

Просмотреть онлайн или скачать pdf Руководство пользователя для Вентилятор Addvent AVIMI200. Addvent AVIMI200 12 страниц.

Печатать страницу

DESIGN AND OPERATING PRINCIPLE

The fan consists of the casing 1, the electric motor attached to the inner fixing bracket 4, the cover 2 that is fixed to the casing with screws

3 (the casing spigot diameter and the cover diameter are equal to the connected air duct diameter), the terminal box 5 that incorporates

a terminal block and a capacitor and enables connection of the fan to single-phase power mains.

6 – outer fixing bracket

7 – screws

8 – bolt

MOUNTING AND SET-UP

The fans are designed for vertical or horizontal mounting. Air motion in the system must be in compliance with the direction of the arrow on

the fan casing. Install a hood on outlet (discharge) spigot side in case of the vertical fan installation. Provide a straight air duct section at least

1 m long on the intake spigot side in case of horizontal fan installation with maximum allowable humidity.

Mounting sequence:

•

Remove the bolt from the casing 1 and install the fixing brackets in such a way so that the holes on the fixing brackets are aligned

with the heads of the screws 3.

•

Fix the fixing brackets on the casing with bolts.

•

Drill the holes in the mounting surface to match the fitment holes of the fixing brackets.

•

Fix the fan with the screws.

•

Connect the air ducts of the respective size to the fan and fix them with clamps.

Fig. 1

READ THE USER'S MANUAL BEFORE INSTALLING THE UNIT.

aViMi