Durr EcoGun 651 Руководство по эксплуатации - Страница 5
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Краскопульт Durr EcoGun 651. Durr EcoGun 651 20 страниц. High-pressure automatic spraying gun
Печатать страницуWorkplace
Relevant standards apply to spraying and handling with the
flammable liquids. Regarding the flammability class of the coating
materials the areas and rooms, where the coating materials are
used, must be marked and modified in compliance with applicable
standards and regulations.
When the guns are used and operated in other countries, the
local standards and regulations apply.
CAUTION
All workers assigned to operation and maintenance of the device must be
provably acquainted with the safety regulations and with the device operation
and maintenance manual!
EQUIPMENT DESCRIPTION
The automatic high-pressure spraying gun EcoGun 651 is designed
to application of the liquids by pressure supply. The gun consists
from two functional parts:
» Front part of the gun mechanical sections consists from stainless
coating substance (hereinafter referred to as NH) distribution
box with needle sealing to prevent leak of the pressure supplied
NH. The connecting angle-adjustable fitting for the NH is fitted
with the M14x1.5 thread. The second inlet of the NH is blinded
by the G1/8" plug; when the plug is replaced with the NH
circulation line (not part of the supply), the NH circulation is
enabled (used for heavier NH etc.).
» The back part of the gun mechanical section consists from the
Duralumin body with pneumatic cylinder for opening (closing) of
the needle valve. The valve is opened by supply of the pressure
control air 5 bars before the piston by the 6 mm diameter hose.
Outlet of the pressure NH is closed by release of the air before
the piston to the atmosphere. The control air is separately
controlled by means of the three-way electro-magnetic valve.
In addition, the gun is fitted with the holder with 10 mm hole for
fixing to the handling device.
EcoGun 651
5